Rated voltage
0.3/0.5kV
System
This product is suitable for transmission of electric energy in power lines with AC 50Hz and voltage not exceeding 300/500V.
occasion
Power devices, fixed wiring, household appliances, meters, lighting devices and telecommunications equipment with AC voltage of 300/500V and below.
Nominal cross section area: 0.75 to 10 mmsq
Operating temperature
The long-term allowable maximum working temperature of the cable conductor is 70℃.
Ambient temperature
The ambient temperature for cable application should not be lower than 0°C.
Laying temperature
The laying temperature of the cable should not be lower than 0℃.
Bending radius
The allowable bending radius of cables with an outer diameter (D) less than 25mm should not be less than 4D, and the allowable bending radius of cables with an outer diameter (D) of 25mm and above should not be less than 6D.
Storage
The finished cable should be stored in an environment with a temperature between 5 and 40°C and a humidity below 85%, so as not to be exposed to direct sunlight or rain, proper ventilation and keep the environment dry.
Installation instructions
During installation, the ambient temperature should not be lower than 0°C. If the temperature of the thermometer test is lower than 0°C, the cable should be preheated before installation; in a high temperature environment without effective heat insulation measures, frequent sunlight or In severe cold places, corresponding special types of plastic wires should be used.
中文
English
